Slavedisplay [Sui]; Playmodes [Plm] - Canton Smart Soundbar 10 Bedienungsanleitung

To deactivate or activate appearance of the info bar please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu Display Setup [UIS] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item Input Stream Display [ISD] and confirm with the "OK" button.
4
Use the "+" or "–" button to deactivate (Manual) resp. activate (Auto) the input stream display confirm with the "OK" button.
5
Exit the menu item by pressing the "M" button.
6

Slavedisplay [SUI]

With this option you can activate resp. deactivate the synchronization and the simultaneous flashing of the blue LED-displays of connected
Smart speakers.
To change the synchronization of the displays of connected Smart (slave) speakers please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu Display Setup [UIS] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item Slavedisplay [SUI] and confirm with the "OK" button.
4
Use the "+" or "–" button to activate resp. deactivate the synchronization confirm with the "OK" button.
5
Exit the menu item by pressing the "M" button.
6
Playmode [PLM]
In this menu you can activate additional playmodes that can then be used and selected in addition to the 3 standard playmodes Stereo, Movie and
Music with the PLAYMODE button on the Smart remote. These playmodes are:
• Discrete: Surround sound for movies, music, etc. without a virtualizer.
• Night: (Virtual) surround sound with reduced dynamic and higher speech intelligibility at low volume levels for "night usage".
• Party: Plays the front channels (L+R) additionally on the surround speakers.
To activate or deactivate an additional playmode please do as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item Playmode [PLM] and confirm with the "OK" button.
3
Use the " " or " " button to select the desired playmode and press the "OK" button.
4
English
3 1 03