Playback Via Bluetooth Wireless Technology - Canton Smart Soundbar 10 Bedienungsanleitung

English
Playback via Bluetooth
Requirements:
• The Bluetooth® wireless technology must be activated on the (mobile) device
• The (mobile) device must support at least the Bluetooth® standard 2.0
• The (mobile) device must be within range of the Smart Soundbar 10 (max. 10 m).
Pairing process
Please select the input [BT] using the buttons Up " " or Down " " and then press the Bluetooth® Pairing button on your remote.
1
Start the search function on your (mobile) device.
2
Select Soundbar 10 as playback device.
3
Note: If you have entered a specific name during the network setup (e.g. Living Room), this name will be listed as playback device.
Once confirmed, the connection will be made automatically and will appear as [BT-] and [CON] in the display.
4
If the connection fails, the message [FAI] will appear.
5
If the (mobile) device requires an access code, please enter 0000.
6
If [BT-] and [DIS] appears in the display, your (mobile) device is out of range or logged out.
7
Operating a (mobile) device
The device most recently connected to the Soundbar connects automatically if the Bluetooth® function is activated and the input [BT] has been
selected. In this case the message [BT-] followed by [CON] appears. Start the playback of a medium on your (mobile) device and the sound will be
played back by the Smart Soundbar 10.
82
wireless technology
®