Using Airplay 2 Technology - Canton Smart Soundbar 9 Kurzanleitung

USING AirPlay 2 TECHNOLOGY

With the Apple AirPlay technology, you can play audio content over the
wireless network (WLAN) using your Smart Soundbar 9.
Additionally, AirPlay 2 technology offers you the possibility to play your
content on several loudspeakers and/or amplifiers synchronously.
Connecting the Smart Soundbar 9 to the WLAN (WiFi network) via
iPhone, iPad or iPod touch
To connect your Smart Soundbar 9 to your wireless network (WLAN) via
iPhone, iPad or iPod touch, please proceed as follows:
Connect your Smart Soundbar 9 to the power outlet and wait until the
1
display shows [NET] followed by [SET].
On your iPhone, iPad or iPod touch, select „Settings" and then „Wi-Fi"
2
(WLAN).
Under the menu item „SET UP NEW AIRPLAY SPEAKER" select the Smart
3
Soundbar 9 as the device to be installed.
The „AirPlay Config..." window opens.
4
a. Under „Network" select the network to which you want to
connect the Smart Soundbar 9.
b. Under "Speaker name" enter the name (synonym) you want to
assign to the Soundbar 9.
c. Optionally, you can assign a password under „SPEAKER
PASSWORD".
d. Select the function „Next" and wait (approx. 30 seconds) until the
Soundbar 9 shows [WIF] / [CON] in the display.
Finalize the registration process in the „Configuration finished" window
5
that opens by pressing the „Done" button. The Smart Soundbar 9 is now
connected to your WLAN (WiFi network) and ready for use.
English
3 4 1