Sound Setup [Snd]; Room Height [Rhe]; Device Height [Dhe] - Canton Smart Soundbar 10 Bedienungsanleitung

English
To adjust the crossover frequency between subwoofer and front speakers please do the following:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu Speaker Setup [SPS] and confirm with the "OK" button.
2
Use the " " or " " button to navigate into the menu Subwoofer Setup [SUB] and confirm with the "OK" button.
3
Use the " " or " " button select the menu item Stereo Sub Xover [SSX] and confirm with the "OK" button.
4
Change the setting using the "+" or "–" button between 40 Hz [40] and 100 Hz [100] and confirm with the "OK" button.
5
To exit the menu, press the "M" button.
6

Sound Setup [SND]

In this menu you can adjust the tone control settings for bass, mid and treble. These adjustments are identical to the ones that can be made using
the Sound-button on the Smart remote.
To adjust the settings for the tone control settings, please do as follows:
To enter the menu, press the "M" button.
1
Enter the first menu item Speaker Setup [SPS] and press the "OK" button.
2
Use the " " or " " button to navigate to the item Sound Setup [SND] and confirm with the "OK" button.
3
Use the " " or " " button to navigate to the paramter you want to adjust and use the "+" or "–" button to select the desired gain given in dB.
4
Press the "M" button to exit this menu item.
4

Room height [RHE]

For optimum spatiality with multi-channel input signals (such as Dolby Atmos® streams), it is necessary to adjust the room height.
The distance is adjustable between 50cm and 500cm in steps of 1cm, whereby 250cm is the factory setting.
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu Speaker Setup [SPS] and press the "OK" button to confirm.
2
Select the menu Room Height [RHE] and confirm with the "OK" button.
3
Use the "+" or "–" button to select the corresponding room height and confirm with the "OK" button.
4
Press the "M" button to exit this menu item.
5

Device height [DHE]

To further optimize the spatiality, you can adjust the height of the device in the speaker settings.
The distance is adjustable between 0cm and 500cm in steps of 1cm, where 50cm is the factory setting.
To enter the menu, press the "M" button.
1
92