Using Chromecast Built-In Tm - Canton Smart Soundbar 10 Bedienungsanleitung

English
Using Chromecast built-in
Requirements:
• (Mobile) device with activated WiFi and Bluetooth® function
• Network access (wireless by WiFi or wired by Ethernet)
• The Google Home app
• An app that supports playback via Chromecast built-in (e.g. Spotify, AllCast, TuneIn, etc.). Audio playback with the Google Home app directly is
not possible.
• Please keep the standard settings of your WiFi router. Changing the settings of your router, especially changes on the DHCP settings,
could lead to an unnstable or not working network connection. For compatible routers please refer to the following Link:
https:/ /support.google.com/chromecast/table/6207427?hl=en-IN
To use the integrated function Chromecast built-in, you need to install the Google Home app on your (mobile) device and to connect the device to
the Soundbar 10. Therefore your (mobile) device and the Soundbar 10 must be connected to the same network.
Therefore please do as follows:
Power up your Smart Soundbar 10 and start your (mobile) device. The WiFi and Bluetooth® function must be activated on your (mobile) device.
1
Note: If you have already installed the Google Home app on your (mobile) device, you can skip item 2 and 3 below.
Open the "Play Store" / "App Store" on your (mobile) device.
2
Search for the Google Home app and install it on your (mobile) device. You will need to accept access to several items, like identity and others.
3
Start the Google Home app and follow the instructions. You will need to assign a Google Account to this app. Please register or login to your
4
account.
Your (mobile) device will now search for available speakers in range. If neccessary, you may have to select the related search function manually.
5
Select Smart Soundbar10xxx as device to be installed.
6
Now, the (mobile) device tries to connect to the Soundbar 10 using Bluetooth® wireless technology.
7
Please follow the further instructions from the Google Home app.
After the connection has been established, the Soundbar 10 plays a melody (sound sequence). Please confirm that you have heard the melody.
8
Now, please select the "room" where you will use the Soundbar (e.g. family room) and confirm with "next".
9
Please select the WiFi network (WLAN) which you want to use for the Soundbar and click on "next".
10
The selected network and the Soundbar 10 will now be connected. After a successful connection, the display of the Soundbar shows [WIF] follo-
11
80
TM