Using Airplay 2 Technology - Canton Smart Soundbar 10 Bedienungsanleitung

USING AirPlay 2 TECHNOLOGY

Note: AirPlay resp. AirPlay 2 is only available on devices of the second generation (Soundbar 10 S2).
With Apple AirPlay technology, you can play audio content over the wireless network (WLAN) using your Smart Soundbar 10.
Additionally, AirPlay 2 technology offers you the possibility to play your content on several loudspeakers and/or amplifiers synchronously.
Connecting the Smart Soundbar 10 to the WLAN (WiFi network) via iPhone, iPad or iPod touch
To connect your Smart Soundbar 10 to your wireless network (WLAN) via iPhone, iPad or iPod touch, please proceed as follows:
Disconnect your Soundbar 10 from the power outlet, wait for at least 30 seconds and reconnect your Soundbar to the mains afterwards. Now
1
please wait until the display shows [NET] and [SET] and continue with the following steps within max. 10 minutes.
On your iPhone, iPad or iPod touch, select „Settings" and then „Wi-Fi" (WLAN).
2
Under the menu item „SET UP NEW AIRPLAY SPEAKER" select the Smart Soundbar 10 as the device to be installed.
3
The „AirPlay Config..." window opens.
4
a. Under „Network" select the network to which you want to connect the Smart Soundbar 10.
b. Under "Speaker name" enter the name (synonym) you want to assign to the Soundbar 10.
c. Optionally, you can assign a password under „SPEAKER PASSWORD".
d. Select the function „Next" and wait (approx. 30 seconds) until the Soundbar 10 shows [WIF] / [CON] in the display.
Finalize the registration process in the „Configuration finished" window that opens by pressing the „Done" button. The Smart Soundbar 10 is now
5
connected to your WLAN (Wi-Fi network) and ready for use.
English
3 8 3