During Use - F&P FlexiTrunk BC190 Gebrauchsanweisung

DO NOT use angel frames, Christmas trees or similar devices as they can puncture
the FlexiTrunk tubing and cause loss of pressure.
Ensure the weight of the circuit is gently supported to reduce tension on the nasal
tubing. A pillow or folded towel is recommended. The FlexiTrunk tubing must have
free movement to allow the baby's head to move without restriction.
The circuit should be kept below the level of the nasal tubing to minimize
condensate at the baby.

During Use:

• Check patient frequently for signs of redness, pressure sores or irritation which may
result from extended prong or mask use. Hourly checks are recommended.
• Alternating between mask and prongs can reduce the risk of irritation. Alternating
every 4 to 6 hours is recommended.
• Positioning of the mask should be adjusted for best fit and minimal leak. If excessive
leak is still present, flow may be increased to compensate. Maximum allowable flow
rate is 15 L/min.
• Check condensate regularly and drain as required.
• Replace the bonnet if it becomes loose during prolonged usage.
FlexiTrunk Nasal Prongs
Product Code A
BC3020 3.0 mm
BC3520 3.5 mm
BC4030 4.0 mm
BC4540 4.5 mm
BC5040 5.0 mm
BC5050 5.0 mm
BC5550 5.5 mm
BC5560 5.5 mm
BC6060 6.0 mm
BC6070 6.0 mm
BC6570 6.5 mm
FlexiTrunk Nasal Tubing
BC19x series
Product Code Size
BC190 50 mm
BC191 70 mm
BC192 100 mm
A B
B
2.0 mm
2.0 mm
3.0 mm
4.0 mm
4.0 mm
5.0 mm
5.0 mm
6.0 mm
6.0 mm
7.0 mm
7.0 mm
Chinstrap
Product Code Size
BC351 20–26 cm
BC353 26–32 cm
BC355 32–38 cm
BC357 38–44 cm
FlexiTrunk Nasal Mask
Product Code Size
BC800 S
BC801 M
BC802 L
BC803 XL
FlexiTrunk Bonnet
Product Code Size
BC300 17–22 cm
BC303 22–25 cm
BC306 25–29 cm
BC309 29–36 cm
FlexiTrunk Headgear
Product Code Size
BC325 29–36 cm
BC328 35–40 cm
BC331 40–45 cm