Product Description - 3M DBI-SALA Nano-Lok XL Bedienungsanleitung

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.

PRODUCT DESCRIPTION:

3M™ DBI-SALA Nano-Lok XL Self-Retracting Devices (SRDs) are designed for overhead applications where the SRD is mounted
®
above and the lifeline remains vertical during use.
Figure 2 identifies key components of the 3M™ DBI-SALA
drum wound Lifelines (A) with an in-line Energy Absorber (B) that retracts into a Nylon Housing (C). A Swivel Eye (D) on the
top of the Housing allows attachment to a valid anchorage connection point with a Carabiner (E). Figure 1 identifies available
Nano-Lok XL models and their connector configurations. See Table 1 for Nano-Lok XL SRD and connector specifications.
Component Specifications:
SRD Housings
Drum
Internal Components
Swivel
Lifeline
Web SRDs
Energy Absorber
Web SRDs
Connector Specifications:
Figure 1 Model
Reference Number
2000025
1
2000112
2
2000184
3
9502195
4
9501089
5
;
Tensile Strength: The tensile strength of each of the connectors listed above is 5,000 lbs (22.2 kN).
Performance Specifications:
SRD Specifications
Capacity Range
Maximum Arresting Force
Average Arresting Force
Maximum Arrest Distance
Minimum Fall Clearance Required
Maximum Free Fall
1 - Assumes the SRD is mounted directly above (overhead) the end user.
2 - SRD must be mounted above user D-ring.
Table 1 – Specifications
Nylon
Nylon
Stainless Steel, Zinc Plated Steel and Aluminum
Zinc Plated Steel
Material
Dyneema Polyester
Web Material
Polyester Vectron
Description
Carabiner
Carabiner
Carabiner
Swivel Self-locking Snap Hook
Swivel Attachment (used with 2000184)
1
2
Nano-Lok XL Self-Retracting Devices (SRDs). Nano-Lok XL SRDs are
®
Cover Material
Rubber
Material
Aluminum
Steel
Aluminum
Steel
Steel
CE Models
130 lbs - 310 lbs (59 kg - 140 kg)
1,350 lbs (6 kN)
900 lbs (4 kN)
42 in (1.07 m)
7.0 ft (2.1 m)
2 ft (0.6 m)
7
Stitching Material
Polyester/Nylon Thread
Gate Opening Gate Strength
3/4 in (19 mm) 3,600 lbs (16 kN)
11/16 in (17 mm) 3,600 lbs (16 kN)
3/4 in (19 mm) 3,600 lbs (16 kN)
3/4 in (19 mm) 3,600 lbs (16 kN)
--- ---