3 842 539 952/2011.02 | TS 2pv
The belt section is delivered
assembled in partial sections.
1. Assemble leg sets over the
entire width of the belt section.
2. Assemble and align the largest
partial segment of the belt
section on leg sets.
3. Assemble the cross connector
on the fi rst part, add the drive
train.
Note: Do not forget the cover
tube (Y)!
4. Add and align the second
partial segment of the belt
section and attach it to the fi rst
part with cross connectors.
6.9
Assembling the belt section CSS/B, CSS/BM,
CSS/F, CSS/FM, b i 2300 mm
Y
Fig. 7
Assembling the belt section CSS/B, CSS/BM, CSS/F, CSS/FM,
b i 2300 mm
Bosch Rexroth AG
1
2
2x
SW13
M
= 25 Nm
D
19/38
539 952-06