Technical Data; Ambient Conditions - Bosch Rexroth CSS/B Betriebsanleitung

38/38 Bosch Rexroth AG
Bosch Rexroth AG
Linear Motion and Assembly
Technologies
Postfach 30 02 07
70442 Stuttgart, Germany
DC-IA/MKT
Fax +49 711 811–7777
www.boschrexroth.com
info@boschrexroth.de
15

Technical Data

• For dimensions, see the TS 2pv transfer system sales catalog,
3 842 540 431
• Maximum load/section load:
• Max. 120 kg, dependent on the number of tracks and the speed ( 28,
diagram: Permissible load and operating time).
— Each track: max. 0.15 kg/cm of surface length, max. 60 kg, dependent
on the speed.
• Noise emissions: < 70 dB (A)
15.1

Ambient conditions

• The transfer systems have been designed for stationary use in a location
that is protected from the elements.
• Operating +5°C to +40°C
temperature
–5°C to +60°C with 20% reduced load
• Storage temperature –25°C to +70°C
• Relative humidity 5% to 85%
• Air pressure > 84 kPa, appropriate height < 1400 m above sea
level
• Permissible fl oor load: 1000 kg/m
• Load values are reduced by 15% when the system is set up in a location
with an altitude > 1400 m.
• Avoid molds, fungi, rodents, and other vermin.
• Do not install or operate near industrial systems with chemical emissions.
• Do not install or operate near sandy or dusty sources.
• Do not install or operate in areas that are regularly jarred by high forces
caused by e.g. presses or heavy machinery.
• Resistant to many common media used in production such as water,
mineral oil, grease, and detergents. Contact your Rexroth representative
if you have any doubts about resistance to specifi c chemicals, such as
test oil, doped oils, aggressive detergents, solvents, or brake fl uid.
• Avoid long-term contact with acidic or basic reacting materials.
TS 2pv | 3 842 539 952/2011.02
2
Technische Änderungen vorbehalten · Subject
to technical modifi cations · Sous réserve
de modifi cations techniques · Soggetto
a modifi che tecniche · Modifi caciones
téchnicas reservadas · Reservado o direito de
modifi cações técnicas