Bosch Rexroth CSS/B Betriebsanleitung Seite 61

3 842 539 952/2011.02 | TS 2pv
6.11.2 Drive with frequency converter (FC)
• The motor data must be entered in order to infi nitely control the
transportation speed of a drive with a frequency converter (FC).
• All parameters can also be entered via the function keys on the display. A
detailed description of the parameters can be found in the Bosch Rexroth
IndraDrive Fc documentation: R911 310 782.
• Depending on the version, the frequency converter can be operated with
a voltage of 200-240 V or 380-480 V.
For further technical data, see the Bosch Rexroth IndraDrive Fc
documentation: R911 310 782.
NOTICE
Malfunctions due to incorrect entry or commissioning
The motor may be damaged or its service life shortened.

Do not deviate from the stipulated motor data as this can result in
damage to the motor.
Minimum wiring
• Minimum wiring must be established for the power supply and control
unit (see "Fig. D: Motor connection, minimum wiring" on page 24).
• The maximum motor cable length may not exceed 20 m.
• Only use shielded motor connection cables that have been approved for
the operation of frequency converters.
Bosch Rexroth AG 23/38