Improper Use; Personnel Qualifi Cations; General Safety Instructions - Bosch Rexroth CSS/B Betriebsanleitung

3 842 539 952/2011.02 | TS 2pv
2.3

Improper use

Any use other than that described in the section "Intended Use" is
considered improper and is not permitted. Bosch Rexroth AG is not liable
for any damages resulting from improper use; the user alone bears the risks
of improper use of the product.
Improper use of the product includes:
• Transport of goods other than those specifi ed.
• Persons riding on the product or conveyed material.
• Persons climbing on the product – walking on the product is not
permitted.
• Operation in the non-industrial sector.
• Operation of the product without a safety device to prevent toppling.
2.4 Personnel qualifi cations
The work described in this documentation requires basic mechanical and
electrical knowledge, as well as knowledge of the appropriate technical
terms. In order to ensure operating safety, these activities may therefore
only be carried out by qualifi ed technical personnel or an instructed person
under the direction and supervision of qualifi ed personnel.
Qualifi ed personnel are those who can recognize possible hazards and
institute the appropriate safety measures due to their professional training,
knowledge, and experience, as well as their understanding of the relevant
conditions pertaining to the work to be done. Qualifi ed personnel must
observe the rules relevant to the subject area.
2.5

General safety instructions

• Observe the regulations for accident prevention and environmental
protection.
• Observe the safety instructions and regulations of the country in which
the product is used or operated.
• Exclusively use Rexroth products in good technical order and condition.
• Follow all instructions printed on the product.
• Persons who assemble, operate, or disassemble Rexroth products must
not consume any alcohol, drugs, or pharmaceuticals that may affect their
ability to respond.
• Only use accessories and spare parts approved by the manufacturer.
• Comply with the technical data and ambient conditions listed in the
product documentation.
• Check the product for visible transport damage.
Bosch Rexroth AG 7/38