Designations; Safety Instructions; About This Section; Intended Use - Bosch Rexroth HD 2 Montageanleitung

1.3.3

Designations

This document uses the following designations:
Table 4: Designations
Designation Meaning
HD 2 Lift rotate unit from the Rexroth TS 2plus transfer system
WT 2 Workpiece pallet from the Rexroth TS 2plus transfer system
BS 2/... Belt section from the Rexroth TS 2plus transfer system
ST 2/... Section from the Rexroth TS 2plus transfer system
SE 2/... Conveyor unit from the Rexroth TS 2plus transfer system
SH 2/... Switch bracket for sensors (proximity switches)
from the Rexroth TS 2plus transfer system
VE 2/... Stop gate from the Rexroth TS 2plus transfer system
Sensor Proximity switches

2 Safety instructions

2.1 About this section

The product has been manufactured in accordance with the generally accepted rules
of current technology. Nevertheless, there is a risk of personal injury and property
damage if you do not read this section and follow the safety instructions in this
document.

Read this documentation carefully and completely before you start working with
the product.

Keep the documentation accessible to all users at all times.

Always include them when giving the product to a third party.

2.2 Intended use

The product is a partly completed machinery.
You may use the product as follows:
• For installation in a Rexroth TS 2plus transfer system
• For lifting Rexroth WT 2 workpiece pallets from the conveyor section and rotating
them by 90° / 180°.
• Maximum load/section load: See technical data on page 37.
• For ambient conditions, see page 37.
The product is strictly intended for professional use and not for private use.
The intended use also includes having read and understood these instructions,
especially section 2 "Safety instructions".

2.3 Improper use

Any use other than that described in the section "Intended use" is considered
improper and is not permitted.
Bosch Rexroth AG is not liable for any damage resulting from improper use. The user
alone bears any risks associated with improper use.
Safety instructions
3 842 358 735/2019-10, MIT: HD 2, Bosch Rexroth AG
7/38