Herunterladen Inhalt Inhalt Diese Seite drucken

Executing A Cooking Cycle In Manual Mode - Garbin PICCOLO Betriebs- Und Wartungsanleitung

Heissluftofen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 69
4 - DIGITAL OVEN PROGRAMMING
4.2.3 Manual humidification during cooking
During cooking in MANUAL mode, by continuously pressing the HU-
MIDITY key you activate the manual humidification for as long as the
key is pressed.
During the execution of the humidification of the oven, the HUMIDITY
icon is permanently red lit.
In case of change of rotation of the fan/ ''reverse'' motors, the humidifi-
cation is interrupted momentarily and then restarted if the HUMIDITY
key is pressed again.
EN

4.2.4 Executing a cooking cycle in manual mode

With the oven ON, after having set the TEMPERATURE and TIME va-
lues, press the START/STOP key to start the cooking cycle. Heating,
ventilation and humidification are activated when you press the key.
Press the START/STOP key in order to block the cooking cycle at any
moment; the countdown is stopped and the TIME display indicates
the remaining time. If the time was set to INF., it remains infinite.
The set values of temperature remain available for a possible new co-
oking cycle.
Afterwards, by pressing the START/STOP key the cooking cycle is re-
started from where it was interrupted.
40
During cooking:
The CHAMBER display shows for 4 seconds the set temperature (TEM-
PERATURE icon led is permanently lit) and for 4 seconds the current
temperature value inside the cooking chamber (the value detected
by the probe, TEMPERATURE icon led flashing). These two values al-
ternate.
In order to change the temperature values please proceed as descri-
bed in paragraph 2.1
The TIME display (TIME icon permanently lit) indicates the decreasing
time in hours, minutes (when the set value is more than one hour)
and in minutes, seconds (when the set value is less than 60 minutes).
In order to change the time values proceed as described in paragraph 2.2
If the INF infinite time is replaced by a value, the countdown starts
from the set value and the cooking cycle becomes timed.
Or if the time value is replaced by the INF infinite value, the countdown
starts from the set value and the cooking cycle becomes INFINITE.
If the START/STOP key is pressed during cooking time, cooking is stop-
ped and the remaining time is kept in memory. By pressing the same
key cooking restarts with the countdown starting from the interrup-
ted value.
At the end of a timed cooking cycle (TIME icon permanently lit), the
END value flashes on the time display, ventilation and heating are tur-
ned off and a buzzer rings for 40 seconds. If during these 40 seconds a
time value is set using the INCREASE/DECREASE keys and the value is
confirmed by pressing the TIME key (TIME display permanent values
not flashing any more) the oven automatically restarts cooking with

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

BravoDeliziosoSuperiore

Inhaltsverzeichnis