Technical Characteristics - Garbin PICCOLO Betriebs- Und Wartungsanleitung

1 - INTRODUCTION

1.3 Technical characteristics

Oven model
PICCOLO
Dimensions HxWxL 550 x 600 x 640 mm 640 x 600 x 640 mm 540 x 720 x 780 mm 650 x 720 x 780 mm
Electric power 2,6 kW
230 V ~
Power source
50/60 Hz
H05RN-F
Type of electric cables
3x1,5 mm
Weight
29 kg
Number of trays
Number of fans
EN
On counter-top
Positioning
or on rack
Water intake
200÷300 kPa
Water pressure
(2÷3 bar)
Water hardness 7-11 °F
Insulation class
IP degree of
IPX1
protection
Electromechanical
Control panel
Digital
1.4 - Handling, transportation and unloading
The packaging of the oven is produced by the company in compliance
with the stipulated agreements or, however, depending on the Country
of destination or the transportation means used.
After the installation, the packaging may be used again or disposed of
in accordance with the regulations in force in the Country of the buyer.
The ovens must be transported in their packaging close to the installa-
tion place.
For all the lifting and handling operations of the oven or of its autono-
28
mously transported components, please refer to specialized personnel.
BRAVO DELIZIOSO
3,4 kW 4,2 kW
230 V ~ 380 V ~
50/60 Hz 50/60 Hz
H05RN-F H05RN-F
2 3x1,5 mm 2 3x1,5 mm 2
46 kg 61 kg
3 4 3
1 1 1
On counter-top On counter-top
or on rack or on rack
3/4" 3/4" 3/4"
200÷300 kPa 200÷300 kPa
(2÷3 bar) (2÷3 bar)
7-11 °F 7-11 °F
I I I
IPX1 IPX1
Electromechanical Electromechanical
Digital Digital
SUPERIORE
6,9 kW
380 V ~
50/60 Hz
H05RN-F
3x1,5 mm 2
71 kg
4
You are advised to check whether the supply corresponds to
2
the specifications of the order. You are advised not to trail or
On counter-top
or on rack
tilt the oven for any reason.
3/4"
The oven must be lifted perpendicularly to the floor, moved
200÷300 kPa
(2÷3 bar)
horizontally, placed perpendicularly to the floor.
7-11 °F
1.5 - Compliance with the standards and directives
I
IPX1
• The ovens comply with the safety provisions and requirements indi-
cated in the following European Directives and their associated spe-
Electromechanical
cific norms:
Digital
- European Machinery Directive 2006/42/EC as amended
- European Low Voltage Directive 2006/95/EC as amended (standard
EN 60335-1 and EN 60335-2)
- Electromagnetic Compatibility Directive 2004/108/EC as amended
(standard EN 50165, EN 55014, EN 50366, EN 61000-4)
Following the conformity with the above-mentioned standards, the
producer declares that his products comply with the European legisla-
tion in force and therefore are provided with the appropriate
king that allows their sale in the European states.
Furthermore the noise emission of the functional components does
not exceed 70 dB (A).
The material that is shipped is accurate-
ly controlled before being delivered to
the shipping agent. Upon reception of
the oven, make sure that it hasn't been
damaged during transport or that the
packaging has not been tampered with
and there has been no consequent re-
moval of components from the inside.
In case of detection of damages or mis-
sing parts inform the carrier and the
producer immediately producing pho-
Fig.1
tographic documentation.
mar-