Play An Activity Back In Full Screen - Dedicated Micros D4 Anleitung

If the destination is set to CDR List refer to the Operators Card for information
on how to copy these files to the CD writer.
Within the Activity list it is possible to highlight an event and press the copy key
on the front of the D4, this will automatically copy the file to the selected
destination (External or CDR List) Refer to Operator Card for information on
copying files to CD.
Activity From
Enter the time and date you wish to search from. The default is the earliest
recorded time on the disk.
Activity To
Enter the time and date you wish to search to.
Playback Time
Select this option to automatically enter the last playback time and date the
user was viewing into the 'Activity to' option.
3. Once the Search Setup screen has been completed, press
search. The following screen is displayed:
Please wait
Reading Disk
Press Event to cancel
The D4 will search the hard disk for activity in the selected areas. Once it has
found 20 (for PAL units) or 18 (for NTSC cameras) events the activity list will
appear. The search can be cancelled at any time by tapping the Event key;
any events found up to that point will displayed in the activity list.
A typical example of an Activity List would be:
Use the keys to move the highlight up and down the list, the Activity
image is automatically updated as the highlight moves. From this screen you
can perform the following:

Play an Activity Back in Full Screen

Highlight the required activity event and press
to begin the
Tap the Event key to return to the Activity list.
Copy an Event to CDR or External Zip and Jaz
Highlight the event to be copied, and press the copy button. The event will be
copied to the CDR Archive list. If the 'Copy destination' on the previous page is
set to 'External', then the images will be copied to an external Zip or Jaz disk.
Refer to the Operators Card for information on how to copy to CD.
View More Activities
To view more than a page of activities scroll down to the bottom of the list, the
unit will search further back in time and another list of activities will appear.
When there are no more activities to list an end bar '==========' is displayed.
Start a New Search
If you wish to start a new search, you must tap the Menu key to exit the
Activity list, then re-enter Search Setup as described in Step 1.
Activity list
1
1
1
1
1
1
1
1
1
1
1
CAMERA 01
1
1
1
1
1
1
1
1
1
26/02/2003 Unit 01 PLAY
13:34:10
to play it back in full screen.
25