Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A4
Machine and Manufacturer's identifi cation
data
A reproduction of the marking or dataplate on the
machine is given.
XXXXXXXXXXXXXXXXXXXXXXXXXXX
Made in UE
Model XXXXXX
PNC XXXX XXXXXXXXXX
XXX V
XX Hz
X,XX kW
IP XX
Figure 4
Reproduction
marking/dataplate
The dataplate gives the product identifi cation and
technical data; listed below is the meaning of the various
information given on it:
Model ..................... factory description of the model
PNC ....................... production number code
Ser. No. ................. serial number
xxx V ...................... power supply voltage
xxx Hz .................... power supply frequency
xxx kW ................... max. power input
xxx ph .................... number of phases
xx A........................ nominal current
IP xxx ..................... liquid protection level
xx ........................... week of production
xxxx ...................... year of production
The dataplate is located on the outside of the appliance,
at the side facing the left wheel.
ATTENTION!
Do not remove, tamper with or make
the machine "CE" marking illegible.
ATTENTION!
Refer to the data given on the machine
"CE" marking for relations with the
Manufacturer (e.g. when ordering spare
parts, etc.).
ATTENTION!
When scrapping the machine, the
"CE" marking must be destroyed.
A5
Appliance identifi cation
This manual only applies to "LIBERO POINT" mobile
counter extractor hood models.
For more details refer to Table 1 "Main technical
characteristics, performance and consumption".
A6
Declaration of conformity
Electrolux Professional SpA declares that the product
relevant to this manual is for professional use and
complies with the requirements of EC directives
K
Ser. No. XXXXXXXX
X ph
XX A
XX
XXXX
of
on
the
machine.
2004/108/EC and 2006/42/EC 2006/95/EC as amended.
The corporate body authorized to construct the technical
fi le is the manufacturer. Additional data is given in the
declaration of conformity.
A7
Copyright
This manual is intended solely for consultation by the
operator and can only be given to third parties with the
permission of Electrolux Professional S.p.A..
A8
Responsibility
The instructions supplied with the machine take into
account the experience and knowledge acquired to
the
date by the Manufacturer. The instructions are updated
to the month and year given in the box in the bottom
right on the cover. The edition corresponds to the
manual revision number. Every new edition replaces
and cancels the previous ones.
Document
Number
Figure 5
Example of edition and document
identifi cation data
The Manufacturer declines any liability for damage and
malfunctioning caused by:
•
Non-compliance with the instructions given in this
manual;
•
Repairs not carried out in a workmanlike fashion, and
replacements using spare parts different from those
specifi ed in the spare parts catalogue (the fi tting and
use of non-original spare parts and accessories can
negatively affect machine operation);
•
Operations by non-specialized technicians;
•
Unauthorized modifi cations or operations;
•
Inadequate maintenance;
•
Improper machine use;
•
Unforeseeable extraordinary events;
•
Use of the machine by uninformed and untrained
personnel;
•
Non-application of the current provisions in the country
of use, concerning safety, hygiene and health in the
workplace.
The Manufacturer declines any liability for damage
caused by arbitrary modifi cations and conversions
carried out by the user or the Customer.
The employer or workplace manager is responsible
for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators,
in compliance with current regulations in the country of
use.
24
DOC. NO.
05953.313.00
EDITION: 1
07.2012
Edition
Month
Year
Werbung
Kapitel
Inhaltsverzeichnis
