H5 Residual Risks; Residual Risks - Electrolux LIBERO POINT ERLP2 Installations-Gebrauchs-Und Wartungs

H5

Residual risks

The machine has several risks that were not completely
eliminated from a design standpoint or with the
installation of adequate protection devices.
Nevertheless, through this manual the Manufacturer has
taken steps to inform operators of such risks, carefully
indicating the personal protection equipment to be used
by them.
Suffi cient spaces are provided for during the machine
installation phases to limit these risks.
To preserve these conditions, corridors and areas
around the machine must always be:
• Kept free of obstacles (e.g. ladders, tools, containers,
etc.);
• Clean and dry;
• Well lit;
For the Customer's complete information, the residual
risks remaining on the machine are given below: the
actions described are deemed improper and therefore
strictly forbidden.
RESIDUAL RISK
Crushing
Slipping or falling
Burns
Shearing of upper limbs
Electrocution
Falling from above
Tipping of loads
DESCRIPTION OF HAZARDOUS SITUATION
Interference by third parties, use of inadequate lifting or carrying equipment,
wrong maneuvers.
The operator may slip due to the presence of water, dirt or residuals of
grease on the fl oor.
The operator deliberately or unintentionally touches some components inside
the machine without using gloves or fi rstly allowing it to cool.
The operator intentionally or unintentionally puts fi ngers in a fan that is on.
Contact with live parts during maintenance operations carried out with the
electrical panel powered. The operator intervenes (with a power tool or
without disconnecting the power to the machine) lying down on the wet fl oor.
The operator works on the machine using unsuitable systems to access the
upper part (e.g. rung ladders, or climbs on it).
During maintenance on the machine or the packing containing the machine
with the use of unsuitable accessories or lifting systems or with load
unbalanced.
Table 2 Residual risks
31