RADEMACHER X-line Handbuch Seite 73

Roller shutter control
Alarm object
Menu
Use alarm object
If „Yes": If alarm object value = 1
If alarm object value = 0
◆ In case of manual operations before and after alarm
◆ In case of automatic operation after alarm
Value of the object before 1 communication and restoration of bus voltage
st
Blocking object 1 / 2
Menu
Use blocking object 1
If „Yes": If blocking object value = 1
If blocking object 1 value = 0
◆ In case of manual operations before and after blocking
◆ In case of automatic operation after blocking
Value of the object before 1 communication and restoration of bus voltage
st
Use blocking object 2
If „Yes": Use settings "blocking object 1"
Wind block
Menu
Use wind block
NOTE
When blocking, the roller shutter moves up.
If „Yes": Type of input object
If „1 Bit":
Waiting time in safe position in min. after wind block
Behaviour after waiting period:
◆ In case of manual operation before and after wind alarm no action • move to last position
◆ In case of automatic operation after blocking
If „16 Bit":
From wind speed in m/sec up-command
Waiting time in safe position in min. after wind alarm
Behaviour after waiting period:
◆ In case of manual operation before and after wind alarm no action • move to last position
◆ In case of automatic operation after blocking
Send current blocking status
Settings
No • Yes
no action • stop • up-command • down-command
no action • move to last position
Follow automatic
0 • 1
Settings
No • Yes
no action • stop • up-command • down-command
no action • move to last position
Follow automatic
0 • 1
No • Yes
see „Blocking object 1"
Settings
No • Yes
1 Bit • 16 Bit
0 ... 255
Follow automatic
2 ... (5) ... 30
0 ... 255
Follow automatic
No • Yes
EN
73