Notes On Menu Navigation; Depiction Of The Factory Settings - RADEMACHER X-line Handbuch

Notes on menu navigation

The following chapters serve to introduce the individual menus and configuration options. In each case we depict a start window and a table with the
corresponding menus and settings. Please note that some of the settings will cause the current start window to the changed, thereby displaying additional
menu items and configuration options.
Example:
A) In menu item „Roller shutter control"/"Monitor the alarm - and use barrier objects" select the setting „No" - then continue with
„Use alarm object".
B) If, in menu item „Roller shutter control"/"Monitor the alarm - and use barrier objects" the setting „Yes" is selected, then additional
menu items and configuration options will be displayed in a window - see below for further information.

Depiction of the factory settings

The following chapters serve to introduce all of the functions / settings and parameters in tabular form.
The factory settings are always shown in bold type and occasionally in parenthesise between the parameters.
Example:
Menu
Exchange Up/Down
Use tilting
Automatic length balancing of hangings
If „Yes":
Send drive position after change
If „Yes":
70
Factory settings:
After the following cycle count
Transmission delay of the position in 0,1 sec
Settings
No • Yes
No • Yes
No • Yes
10 ... (32) ... 40
No • Yes
0 ... (10) ... 50
EN