Establish Connection; Menu Tree - Sartorius Stedim Biotech BioWelder Total Containment TC 2000 Bedienungsanleitung

6.3.1

Establish connection

The current IP address is requested from the touch screen in the Info menu and it
must be entered in the URL box of the browser as shown in the diagram below .
See also Chapter 6 .2 .11 Info
Example: The IP address of the device is 192 .168 .1 .104 . Input in the URL box:
"192 .168 .1 .104" followed by the Enter key . The homepage of the device then appears
as follows:
Depending on the browser used, shortcuts or buttons can be set up to operate several
®
BioWelder TC devices efficiently from one browser .
If the device is initialised with the Web browser at the time of welding, the
Initialise Axes menu item is greyed out. If not, the Weld and Validation menu
items are greyed out.
6.3.2

Menu tree

Menu Meaning
User login or logout,
see Chapter 6 .3 .6 User login/logout
Initialise axes,
see Chapter 7 .1 Initialise axes
Weld, see Chapter 7 .2 Weld
Validation, see Chapter 7 .4 Temperature Vali-
dation
General settings,
see Chapter 6 .3 .5 General settings
User management,
see Chapter 6 .3 .8 User management
Info, see Chapter 6 .3 .10 Info
Operation 27