Changing The Console Video Mode - G&D DLVision-DP Handbuch

Configuration

Changing the console video mode

NOTE: This function can only be (de)activated in the web application.
In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is reactivated as soon as the user at the concurrent
console finishes his inputs and the time span of the input lock has elapsed.
How to select the video mode for the local console:
1. Use the tree view to click on
2. Double-click the computer module of the KVM extender to be configured.
3. Click the Local
4. Use the field

always on
 off for actions at remote console
5. Click to save your changes
OK
How to select the video mode for the remote console:
1. Use the tree view to click on KVM Extenders > [All Extenders
2. Double-click the computer module of the KVM extender to be configured.
3. Click the Remote
4. Use the field
 always on
 off for actions at local console
5. Click OK to save your changes.
Related topics:
 Changing the time span of the input lock on page 30
 Right for permanent console access on page 31
32 · G&D DL-Vision-DP
KVM Extenders > [All Extenders]
tab.
Image display to select between the following options:
tab.
Image display to select between the following options:
.
.
]