Right For Permanent Console Access - G&D DLVision-DP Handbuch

Right for permanent console access

NOTE: This function can only be (de)activated in the web application.
If no inputs are being made at the active console during the adjusted time span of
the automatic input lock (default: 1 second), the default settings of the KVM
extender permit the other console to operate the extender.
If the function right for permanent console access is activated in the web applica-
tion, the user is enabled to permanently activate the input lock with the key combi-
nation Hotkey+PrtScr
Pressing this key combination deactivates the input devices of the concurrent con-
sole. By pressing the key combination again at the active console, both consoles can
operate the KVM extender again.
NOTE: The control LEDs NUM, and Scroll Lock are blinking simultaneously if
the setup mode has been successfully activated.
The blinking Scroll LED at the active console indicates that the exclusive opera-
tion of the KVM extender has been activated.
How to select the right for permanent console access:
1. Use the tree view to click on
2. Double-click the computer module of the KVM extender to be configured.
3. Click the tab
4. Use the field Permanent Access mode
 gives right for permanent access
Enabled
Disbaled  denies right for permanent access
5. Click OK to save your changes.
Related topics:
 Exclusive operation of the KVM extender on page 18
 Changing the console video mode on page 32
(default: Ctrl+PrtScr ).
KVM Extenders > [All Extenders]
Local or Remote .
to select between the following options:
G&D DL-Vision-DP · 31
Configuration
.