Exclusive Operation Of The Kvm Extender - G&D DLVision-DP Handbuch

Operation

Exclusive operation of the KVM extender

Activate the right for permanent access to operate the KVM extender exclusively
with one console.
If this function is active, the extender's exclusive operation can be activated by press-
ing the hotkey
Hotkey+Print
After having pressed this key combination, the input devices of the competing con-
sole are deactivated. By pressing the key combination again at the console where the
permanent input lock has been activated, users at both consoles are again able to
operate the KVM extender.
NOTE: After the exclusive operation of the KVM extender has been activated at
one console, the Caps Lock, Num and Scroll Lock LEDs are blinking alternately at
the keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates the exclusive opera-
tion of the KVM extender.
ADVICE:
In the standard configuration of the KVM extender, the computer's
video signal is output at the active and the competing console monitor.
If necessary, change the video modes of the user modules (see page 32) to switch
off the image of the competing console while operating the extender at the other
console.
Related topics:
 Right for permanent console access on page 31
 Changing the console video mode on page 32
 Changing the »Permanent Access« key on page 29
18 · G&D DL-Vision-DP
(default:
Ctrl + Print
).