G&D DLVision-DP Handbuch Seite 74

Installation
Connecting the computer's video output
Mouse
Keyb. USB K/M
DisplayPort CPU: Use the DP-Cable-M/M-2 cable to connect the computer's video out-
put to this interface.
NOTE:
Each video channel of the MultiChannel variant is provided with one
Port CPU interface. The numbers behind the interface names assign each interface
to a given channel.
Establishing a connection to the user module
Mouse
Keyb. USB K/M
IMPORTANT:
The device uses components with laser technology complying with
laser class 1.
Never stare into the invisible laser beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interface and the cable
plugs.
Transmission|Tx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory. Connect the other end of the cable to the Transmission|Rx interface of the user
module.
Transmission|Rx: Insert the LC plug of another fibre optic cable. Connect the other
end of the cable to the Transmission|Tx interface of the user module.
NOTE: Each video channel of the MultiChannel variant is provided with one
interface. The numbers behind the interface names assign each interface to a
sion
given channel.
8 · G&D DL-Vision-DP
Mouse CPU
Keyb. CPU USB CPU Transmission
Mouse CPU
Keyb. CPU USB CPU Transmission
Link
Video
DVI-D DL Out DisplayPort CPU
Link
Video
DVI-D DL Out DisplayPort CPU
RS232 Line In Line Out
Display-
RS232 Line In Line Out
Transmis-