Status Displays - G&D DLVision-DP Handbuch

Status displays

The LEDs on the front panel of the computer module and the user module enable
you to control the KVM extender's operating status at any time.
Meaning of the LEDs on the front panels
Range LED
Ident. Ident.
Power Red.
Main
Status Ready
System
NOTE:
The System LED
Status Meaning
on Lights up as soon as the LED has been activated
via the web application.
on The power pack is switched on and supplies the
necessary voltage.
off The power pack is switched off or the device is not
connected to the power network.
on The power pack is switched on and supplies the
necessary voltage.
off The power pack is switched off or the device is not
connected to the power network.
blinking Device is ready for operation.
off Device is booting or errors during internal commu-
nication.
blinking Device is ready for operation
off Device is booting or errors during internal commu-
nication.
may be flickering during booting.
Status displays
G&D DL-Vision-DP · 51