Changing The Setup Key - G&D DLVision-DP Handbuch

Configuration

Changing the setup key

The hotkey to call the setup mode consists of at least one hotkey modifier (see
Changing the hotkey on page 27) and an additional setup key which can be selected by
the user.
You can change the hotkey modifier
How to change the current setup key:
1. Press the key combination
enable the setup mode.
If the hotkey delay is active, press the key combination during the adjusted time (default:
7 seconds).
2. Press the setup key
3. Press the setup key to be activated.
The following keys are provided; Backspace, Print, Scroll, Num, Pause, Insert,
Delete, Pos 1, End, PgUp, PgDn and Space.
1. Use the tree view to click on
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
4. Use the field
The following keys are provided: Backspace, Print, Scroll, Num, Pause, Insert,
Delete, Pos 1, End, PgUp, PgDn and Space.
5. Click OK to save your changes.
28 · G&D DL-Vision-DP
Ctrl
Hotkey+Backspace
S .
KVM Extenders > [All Extenders]
tab.
to select the desired key.
Setup key
as well as the setup key
(default:
Backspace .
Ctrl + Backspace ) to
.