Connecting The Computer; Optional: Connecting The Local Console - G&D DVIVision-USB 2.0 Series Installationsanleitung

Installation

Connecting the computer

Line Out Line In
Transmission DVI/VGA Out
DVI CPU: Use the DVI-D-M/M-2 cable to connect the digital video output of the com-
puter to this interface.
NOTE: Mouse and keyboard of both consoles can either be connected as a PS/2
device or as a USB device.
Use the green plug of the PS/2 twin cable to connect the PS/2 mouse
Mouse CPU:
interface of the computer to this interface.
Use the purple plug of the PS/2 twin cable to connect the PS/2 keyboard
Keyb. CPU:
interface of the computer to this interface.
Use the USB-AM/BM-2 cable to connect a USB interface of the computer
USB CPU:
to this interface.
USB 2.0 CPU: Use the USB-AM/BM-2 cable to connect a »High-Power« USB interface
of the computer to this interface.

Optional: Connecting the local console

It is also possible to install a local console at the computer module.
Connect keyboard, mouse and monitor of the local console to the interfaces that are
listed in the following.
Line Out Line In
Transmission DVI/VGA Out
Connect the monitor of the local console to this interface.
DVI/VGA Out:
If the monitor provides an analog VGA input, connect an optional adapter to this
interface. Afterwards, connect the monitor's VGA cable to the adapter.
Keyb.: Connect the PS/2 keyboard of the local console to this interface.
Mouse: Connect the PS/2 mouse of the local console to this interface.
5 · G&D DVIVision-USB 2.0
RS232 Mouse
DVI CPU Keyb.
RS232 Mouse
DVI CPU Keyb.
Mouse CPU Red. Power USB 2.0 Trans.
Keyb. CPU USB CPU USB 2.0 CPU
Mouse CPU Red. Power USB 2.0 Trans.
Keyb. CPU USB CPU USB 2.0 CPU