Resetting The Default Settings - G&D DLVision-DP Handbuch

Configuration

Resetting the default settings

NOTE: This function can only be carried out in the web application.
This function resets the default settings of the KVM extender. By performing this func-
tion, the default settings of the KVM extender listed on page 21 are reactivated.
How to reset the default settings:
1. Click the tool symbol in the tool bar.
2. Click the tabs
Use the information in the fields »Device« and »Comment« to check if you have
selected the correct device.
3. Disable the option
the network interfaces.
4. Click Default settings
NOTE: The default settings can also be reset by pressing the Reset button.
Further information regarding this topic are given on page 19.
42 · G&D DL-Vision-DP
Tools > Default settings
Delete network config
to reset the default settings.
.
for maintaining the configuration of