Changing The Video Mode Of Consoles - G&D VisionXS-F-DP-UHR Installation Und Bedienung

Configuration

Changing the video mode of consoles

IMPORTANT:
The activation of the
and the connection to a second user module are prerequisites for this oper-
sceiver
ation option.
In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also specify that the image of the other console is temporarily or permanently
deactivated during console inputs.
How to select the video mode of a console:
1. Press
Ctrl+Num
2. Select the row
3. Under Video mode
always on
keep off
switch off
4. Press F2 to save your settings.
35 · G&D VisionXS-F-DP-UHR
Transm. Redundancy feature
(default) to open the on-screen display.
Console setup and press
press F8 to select one of the following options:
 The computer screen is displayed on both the monitor of the
active and the monitor of the concurrent console (default).
 The screen of this console is switched off permanently if an
entry is made on the concurrent console.
After the time period of the input lock has elapsed, you need to
make an entry on this console to switch on the screen again.
 The screen of this console is temporarily switched off whenever
an entry is made on the concurrent console.
After the time period of the input lock has elapsed, the screen is
automatically switched on again.
, an additional
Enter .
SFP tran-