Configuration; Overview Of Functions And Default Settings - G&D DLVision-DP Handbuch

Configuration

The KVM extender can be configured in the setup menu or via
cation:
 The Setup mode is activated through a console keyboard. You can change the con-
figuration by pressing special setup keys.
 The web application provides a graphical user interface to configure
Config Panel
and monitor the KVM extender via web browser.
NOTE: Some functions of the KVM extender can only be executed in the setup
mode or via the Config Panel
the following pages.

Overview of functions and default settings

The following table provides an overview of the functions that can be configured in
the KVM extender. In addition, the default settings and references to detailed func-
tion descriptions are listed.
Function
Enabling/Disabling the setup mode
Enabling/Disabling the hotkey delay
Changing the hotkey
Changing the time span of the input lock
Right for permanent console access
Changing the console video mode
Selecting the EDID mode of the KVM extender
Freeze mode
Selecting USB keyboard modes
Support for special keyboards
Changing the scancode set of a PS/2 keyboard
Reinitialising USB input devices
Adjusting the mouse sensitivity
Starting the user module without keyboard
Enabling or resetting a PS/2 mouse
Resetting the default settings
The following pages provide a detailed description of how to operate the setup
mode (see page 22) and the
web application. Note the advices referring to this on
Config Panel web application (see page 23).
Configuration
Config Panel web appli-
Default setting Page
enabled 25
7 seconds 26
Ctrl 27
1 second 30
switched on 31
switched on 32
Auto 33
enabled 34
PC Standard 35
switched off 37
Scancode set 2 38
switched off 39
normal 40
deactivated 40
41
42
G&D DL-Vision-DP · 21