Selecting The Edid Mode Of The Kvm Extender - G&D DLVision-DP Handbuch

Selecting the EDID mode of the KVM extender

NOTE: This function can only be (de)activated in the web application.
The EDID information (Extended Display Identification Data) of a monitor inform the
graphics card of a connected computer about different technical device features. The
information are usually transmitted via Enhanced-DDC (Enhanced Display Data Chan-
nel) from KVM extender to the computer without alteration.
A special EDID mode can be activated if the computer connected to the KVM
extender is assembled with a
cial treatment of EDID data by the graphics card.
Some resolutions can be selected using a special GUD profile. The profile names
refer to the resolution that is transmitted to the monitor when using this profile
Alternatively, the EDID profile of a monitor can be read in. The extender transmits
the profile to the connected computer. Detailed information about this topic is given
in the separate manual for the
IMPORTANT:
It might be possible that Barco PVS graphics cards do not create an
image in the Auto mode.
How to select the EDID mode of the KVM extender:
1. Use the tree view to double-click on
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Use the EDID profile
 automatic treatment of EDID data (default)
[Auto]
[BARCO PVS]  special mode for Barco PVS graphics cards
 G&D profile for a particular resolution
GUD DVI ...
Name  EDID profile read in by user
5. Click to save your settings.
OK
NOTE: Please mind the activation sequence recommended on page 14 when initi-
ating or connecting another monitor.
Barco PVS graphics card. This mode considers the spe-
Config Panel web application.
KVM Extenders > [All Extenders]
tab.
field to select between the following options:
Configuration
.
G&D DL-Vision-DP · 33