Operating The Setup Mode - G&D DLVision-DP Handbuch

Configuration

Operating the setup mode

The configuration of the KVM extender can be changed in the setup mode and the
web application.
Config Panel
Enable the setup mode using the console keyboard. After enabling, the configura-
tion of the KVM extendercan be changed by using specialsetup keys.
NOTE:
Only one setup function can be performed after the calling up of the setup
mode. If you want to perform more functions, please restart the setup mode .
How to enable the setup mode:
 Press the key combination
the setup mode.
NOTE:
In the default settings, the key combination to activate the setup mode
has to be pressed for seven seconds.
After the setup mode has been called for the first time, you can deactivate the
hotkey delay by pressing the setup key
NOTE: The successful activation of the setup mode is displayed by the flashing
NUM, and Scroll control LEDs on the keyboard.
Additionally, the Caps Lock, NUM and Scroll LEDs are flashing at the other con-
sole.
How to perform a setup function:
 After enabling the setup mode, press one of the setup keys described on the follo-
wing pages.
How to end the setup mode without performing a function:
 Press ESC to end the setup mode.
22 · G&D DL-Vision-DP
Hotkey+Backspace
(see page 26).
8
(default: Ctrl + Backspace ) to activate