Changing The Osd Key - G&D VisionXS-F-DP-UHR Installation Und Bedienung

Changing the OSD key

The hotkey to open the OSD consists of at least one hotkey modifier
(see Changing hotkeys on page 27) and an additional OSD key. You can freely select
these keys from a number of selectable keys.
You can change both the hotkey modifier
How to change the OSD key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
OSD actionkey
OSD when pressing the OSD key together with the hotkey modifier(s):
Num  Num key (default)
 Pause key
Pause
 Insert key
Insert
Delete  Delete key
Home  Home key
 End key
End
 Page Up key
PgUp
PgDn  Pace Down key
Space  Space key
5. Press F2 to save your settings.
1. In the menu, click on
2. Click twice on the computer module (
3. In the Hotkey field, select the OSD key to open the on-screen display when
pressed together with the hotkey modifier key(s).
You can choose between the keys Num, Pause, Copy, Delete, Home, End,
PgUp, PgDn and Space.
4. Click on .
Save
Ctrl
(default) to open the on-screen display.
System setup and press
Hotkey and press Enter .
, press to select an OSD key. Now you can open the
F8
KVM extender .
and the OSD key
Num
Enter .
) you want to configure.
CPU
G&D VisionXS-F-DP-UHR · 28
Configuration
.