Changing the OSD key
The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 31) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier
How to change the current OSD key:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under
OSD actionkey
OSD when pressing the OSD key together with the hotkey modifier(s):
Num
Num key (default)
Pause
Pause key
Insert key
Insert
Delete
Delete key
Home key
Home
End key
End
PgUp
Page Up key
Pace Down key
PgDn
Space
Space key
5. Press
to save your settings.
F2
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
3. Click on the tab
4. In the
Hotkey
field, select the OSD key to open the on-screen display when
pressed together with the hotkey modifier key(s).
You can choose between the keys Num, Pause, Copy, Delete, Home, End,
PgUp, PgDn and Space.
5. Click on
Save
Ctrl
(default) to open the on-screen display.
System setup
and press
Hotkey
and press
Enter
, press
to select an OSD key. Now you can open the
F8
KVM extender
.
.
General
and then on the tab
.
and the OSD key
Num
Enter
.
.
CPU
.
G&D VisionXS-IP-C-DP-UHR · 32
Configuration
.