Operation; Concurrent Operation Of The Kvm Extender; Operating The Kvm Extender Exclusively - G&D DP1.2-Vision-CAT Bedienungsanleitung

Operation

The computer connected to the computer module (
at the remote console of the user module as well as at the local console of the com-
puter module.
After their initiation, both consoles are enabled to operate the computer.
NOTE: The monitors of the remote and the local console of the KVM extender
always display the same image at the same time.
The paragraph Changing the video mode of consoles on page 30 explains how this set-
ting can be changed.

Concurrent operation of the KVM extender

If a user carries out a keyboard or a mouse input, the KVM extender automatically
locks the input devices of the concurrent console. The lock is lifted if no inputs are
made at the active console during the adjusted timing of the automatic input lock
(default: 1 second).
After the automatic input lock has been lifted, both consoles are again able to oper-
ate the computer.
As an alternative to operate the computer concurrently via consoles, the exclusive
operation (see page 15) can be activated.
Related topics:
 Changing the time span of the input lock on page 28
 Changing the video mode of consoles on page 30

Operating the KVM extender exclusively

Activate the right for permanent access to operate the KVM extender exclusively
with one console.
If this function is activated, the extender's exclusive operation can be activated by
pressing the hotkey Hotkey+Print
DP1.2-Vision-CPU
(default: Ctrl + Print ).
Operation
) can be operated
G&D DP1.2-Vision-CAT · 15