Operation; Concurrent Operation Of The Kvm Extender; Operating The Kvm Extender Exclusively - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Operation

Operation
The computer connected to the computer module (
the remote console of the user module as well as at the local console of the computer
module.
After their initiation, both consoles are enabled to operate the computer.
NOTE: The monitors of the remote and the local console of the KVM extender
always display the same image at the same time.
The paragraph Changing the video mode of consoles on page 32 explains how this set-
ting can be changed.

Concurrent operation of the KVM extender

If a user carries out a keyboard or a mouse input, the KVM extender automatically
locks the input devices of the concurrent console. The lock is lifted if no inputs are
made at the active console during the adjusted timing of the automatic input lock
(default: 1 second).
After the automatic input lock has been lifted, both consoles are again able to oper-
ate the computer.
As an alternative to operate the computer concurrently via consoles, the exclusive
operation (see page 17) can be activated.
Related topics:
 Changing the time span of the input lock on page 30
 Changing the video mode of consoles on page 32

Operating the KVM extender exclusively

Activate the right for permanent access to operate the KVM extender exclusively
with one console.
If this function is activated, the extender's exclusive operation can be activated by
pressing the hotkey
Immediately after pressing this hotkey, the input devices of the concurrent console
are deactivated. By pressing the hotkey again at the active console, users at both
consoles are again able to operate the KVM extender.
NOTE:
After the exclusive operation of the KVM extender has been activated at
one console, the Caps Lock, Num as well as the Scroll Lock LEDs are blinking alter-
nately at the keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates the exclusive opera-
tion of the KVM extender.
17 · G&D DP-Vision-Fiber
Hotkey+Print (default:
DP-Vision-CPU
Ctrl + Print ).
) can be operated at