Controls - Frigomat T4S Serie Gebrauchsanweisung Und Wartungshandbuch

6.2 CONTROLS

DISPLAY
Displays the information relative to work programs and allowed
adjustments.
LED
The LED switches on to signal when the door is opened, when the
safety grid is lifted or any anomalies of the system.
STOP
In whatever operating phase the machine is in, pressing the STOP
key stops the machine and cancels the function in progress. Do not
stop the machine when the ice cream is close to its maximum
consistency, during the automatic or semi-automatic cycles. This
precaution lengthens the life of the transmission belt and of the
beater motor.
EXTRAZIONE/ UP (EXTRACTION/ UP)
This key has several functions:
1. With the machine
EXTRACTION/UP key only the beater motor is started.
In any other operative phase of the machine, pressing the
EXTRACTION/UP key only the beater motor keeps running and
the compressor stops. Press the STOP key to stop mixing.
2. During programming, by pressing the EXTRACTION/UP key, it is
possible to scroll the menu entries or to increase the value of the
selected parameter.
PRODUZIONE/CONFERMA (PRODUCTION/CONFIRM)
This key has several functions:
1. AUTOMATIC CYCLE
With the machine in STOP mode, by pressing the PRODUCTION
key the automatic cycle starts that enables to reach the best
possible compromise between freezing time and ice cream
consistency, regardless of the type of mixture used, provided that
they are within the minimum and maximum capacity of the
appliance.
2. AUTOMATIC HARD CYCLE
With the machine in automatic cycle, by pressing the
PRODUCTION key again it is possible to access the automatic
Hard cycle, that enables to reach the optimal level of ice cream
batch freezing, regardless of the type of mixture used, provided
that they are within the minimum and maximum capacity of the
appliance.
in STOP mode, by pressing the
ENGLISH - 14