Opening The Axon-Bus Gripping Component In An Emergency - Ottobock AxonHook 8E600 Serie Gebrauchsanweisung

8.3 Opening the Axon-Bus gripping component in an emergency

8.4 Proper handling of the Axon-Bus gripping component
Hand flexion, hand extension procedure
This function enables the flexion or extension of the Axon-Bus gripping component.
Pronation, supination procedure
CAUTION
Risk of pinching between the hook tips
Injury due to pinching of body parts.
Ensure that no body parts are between the hook tips when using or rotating the product.
►
INFORMATION
The following steps apply only to the product "9S501 AxonRotation adapter" (mechanical rota­
tion). When using the product "9S503 AxonRotation", pronation and supination are controlled
by the associated muscle signals.
This safety function allows the Axon-Bus gripping component to be
opened regardless of the control signals present.
1) With the Axon-Bus prosthetic system switched on, press the char­
ging receptacle button and hold for approximately three seconds
until the Axon-Bus gripping component begins to open.
→ A pulsating beep sounds as it opens.
2) Releasing the button immediately stops the process of opening
the Axon-Bus gripping component and turns the entire Axon-Bus
prosthetic system off.
Flexible mode
1) Push the unlock lever of the Axon-Bus gripping component (to the
stop) until it engages.
→ The wrist unit can be moved without engaging at the ratchet
positions.
2) When the unlock lever is pushed again, the wrist unit engages at
the next available position.
Rigid mode
1) Push the unlock lever of the Axon-Bus gripping component lightly
(not to the stop) and move the wrist unit to the desired position.
2) When the unlock lever is released, the wrist unit engages at the
next available position.
The wrist unit supports pronation and supination.
► Grasp the gearbox and turn the wrist unit to the desired position.
23