Legal Information; Trademarks; Technical Data - Ottobock AxonHook 8E600 Serie Gebrauchsanweisung

11 Legal information

11.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.

11.2 Trademarks

All product names mentioned in this document are subject without restriction to the respective
applicable trademark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of
the respective owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justi­
fy the conclusion that the denotation in question is free of third-party rights.
11.3 CE Conformity
This product meets the requirements of the European Directive 93/42/EEC for medical devices.
This product has been classified as a class I device according to the classification criteria out­
lined in Annex IX of the directive. The declaration of conformity was therefore created by the man­
ufacturer with sole responsibility according to Annex VII of the directive.

12 Technical data

Ambient conditions
Storage and transport in original packaging
Storage and transport without packaging
Operation
Charging the battery
General
Reference number
min. opening width
min. closing time
max. closing time
Weight
Product service life
The following gripping forces and load limits apply only when the battery of the Axon-Bus pros­
thetic system is fully charged and at room temperature.
Maximum gripping forces
Gripping force at the hook tips
→ The AxonHook has been initialised.
The complete opening width and maximum speed is available once
again.
-25 °C/-13 °F to +70 °C/+158 °F
-25 °C/-13 °F to +70 °C/+158 °F
max. 93 % relative humidity, non-condensing
-10 °C/+14 °F to +60 °C/+140 °F
max. 93 % relative humidity, non-condensing
+5 °C/+41 °F to +40 °C/+104 °F
8E600=*
130 mm/5.12 inch
0.75 sec.
10 sec.
400 g/14.10 oz
500,000 gripping cycles
approx. 110 N
25