Ottobock 3F1-1 Gebrauchsanweisung Seite 37

7
8
6.3 Only for C-Leg: install charger extension cable
Complete the following steps to install the charger extension cable for the C-Leg (4X157):
9
6.4 Assembling the functional knee part
Complete the following steps to assemble the functional knee part:
11) Carefully deburr the sanded areas.
12) Reassemble the functional knee part.
INFORMATION: Ensure that the axles
and clips engage correctly.
13) Reinsert the two blind plugs flush into the
clips from the inside.
1) Install the charger extension cable (see the
647G1146 instructions for use).
2) Assemble the charger extension cable and
O-rings so that the ribs of the functional
knee part do not press on the cables and
O-ring.
INFORMATION: The functional knee
part has corresponding recesses to
accept the O-ring and charging cable.
37