Functional Test - Ottobock 3F1-1 Gebrauchsanweisung

23
24
25

6.9 Functional Test

After assembly, the following points have to be checked:
1) Make a longitudinal cut in the sheath.
INFORMATION: The slit has to be
above the opening in the foam.
2) Secure the sheath on the inside of the
opening with contact adhesive.
3) Press the installation ring for the inductive
charger (4X259) into the opening so it is
flush with the foam and sheath.
INFORMATION:
647G1148 instructions for use.
4) Glue in the charging unit flush on the out­
side of the foam.
INFORMATION:
647G1148 instructions for use.
Please note the
Please note the
43