•
1C63 Triton Low Profile
•
1C64 Triton Heavy Duty
•
1C30 Trias
•
1D10 Dynamic foot
•
1D11 Dynamic foot
•
1M10 Adjust
•
Terion K2: 1C11
•
1A30 Greissinger plus
Adapter combination possibilities
•
4R57, 4R57=ST rotation adapter
Limited compatibility:
C-Leg: Collision with functional knee part from a tilt angle of 4.3° in the direction of the 4R57 and
4R57=ST rotation adapter button
Genium: Collision with functional knee part from a tilt angle of 3.2° in the direction of the 4R57
und 4R57=ST rotation adapter button
3 Application
3.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
The product serves to finish the prosthesis in the sense of restoring a natural appearance that is
as inconspicuous as possible.
3.2 Area of application
The product is intended exclusively for wearers of the 3C98-3/3C88-3 C-Leg, 3B1-2/3B1-2=ST
Genium and 3B1-3/3B1-3=ST Genium.
The product can be used with a knee axis-floor measurement of up to 560 mm. The minimum
knee axis-floor measurement that can be fitted depends on the foot that is used with the tube
adapter at maximum insertion.
3.3 Conditions of use
The product is intended exclusively for use on one user. Use of the product by another person is
not approved by the manufacturer.
The product was developed for everyday use and must not be used for unusual activities such as
extreme sports (free climbing, paragliding, etc.).
3.4 Indications
•
For patients with knee disarticulation or transfemoral amputation
•
The patient must be able to understand usage and safety messages and put them into prac
tice.
3.5 Qualification
The fitting of patients with the product may only be carried out by qualified personnel (e.g. O&P
professional).
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
NOTICE
Warning regarding possible technical damage.
•
1D35 Dynamic Motion
•
1C40 C-Walk
•
1E56 Axtion
•
1E57 Lo Rider
•
1B1 Meridium
•
Meridium: 1B1-2
•
1C66 Triton smart ankle
31