Cleaning And Care; Legal Information - Ottobock 3F1-1 Gebrauchsanweisung

28
INFORMATION
Together with the user, vary how far the functional stocking is pulled up. The tension is not per­
mitted to noticeably impair the use of the joint. For example, secure the functional stocking on
the socket while the prosthesis is angled.
The adhesion of the functional stocking is best directly on the socket material. This needs to be
considered when shaping the socket volume.
INFORMATION
The inductive charger for Genium can be used after putting on the functional stocking. Exposing
the charging unit is not necessary.

7 Cleaning and care

7.1 Cleaning the functional cosmesis
► Clean the plastic parts with a damp, soft cloth and then let them dry.
7.2 Cleaning the functional stocking
► Wash the product at 30°C/86°F in a washing machine
Setting: gentle cycle (for delicates).
INFORMATION
Note the washing symbols on the label.
7.3 Care of the functional stocking
• Wipe the silicone coatings on the inside of the functional stocking with a damp cloth every
three days.

8 Legal information

8.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
46
3) The functional stocking is secured distally
1 cm above the footshell.
4) Pull the functional stocking up.
INFORMATION: The label field in the
functional stocking identifies the back
of the stocking.
INFORMATION: Note the correct posi­
tioning of the functional zones.
5) For the best possible adhesion, position
the end of the functional stocking directly
on the socket surface if possible.