Usable Digital Decoders - FLEISCHMANN TWIN-CENTER 6802 Handbuch

6802_10_12_04_Handbuch_GB
5 Useable Digital Decoders
5

Usable Digital Decoders

Digital decoders with differing digital languages
can be operated independently of each other.
Loco Decoders
• FMZ-decoder
• TWIN-decoder
• DCC-decoders corresponding to the
NMRA standard
Points and switching decoders
• Receiver modules for electrical accesso-
ries 6850
• DCC-compatible decoders of other
manufacturers which correspond to the
NMRA standard
Functions Decoder
• DCC-ormat, all function decoders which
correspond to the NMRA standard DCC-
format
In sole operation using only one language, all
receiver modules are useable. However, in a
mixed operation with differing digital formats then
because of the different developments from
diverse manufacturers some difficulties may
occur. For example, some of the older DCC-
decoders react in FMZ-format leading to a jerky
start of the motor. They receive each signal,
which is not DCC, for track power and turn them-
selves off in D.C. operation. This can even be the
case for later decoders, and here it may be alle-
viated by another setting of the internal operating
perameters, which can naturally be carried out
from your TWIN-CENTER.
102
01.03.2007 13:57 Uhr Seite 102