Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6802_10_12_04_Handbuch_GB
4.6
Connecting the
Computer-Interface
The computer interface is carried out using a
series computer port with a 9-pole Sub-D-plug.
This port can be found on all IBM compatible
PC's or laptops and on Apple Macintosh equip-
ment.
A comprehensive description of the computer
interface can be found in chapter 11.
4.7
Connecting LocoNet
The TWIN-CENTER supports the currentequip-
ment known to date, which can be accessed via
a LocoNet connector port.
In this way, the LocoNet booster can be connec-
ted on LocoNet B (socket 4). The connection for
LocoNet T (socket 5) is designed only for hand
controller equipment and equipment that does
not require a digital track signal.
4.8
Connecting I
On both sides of the TWIN-CENTER you will find
connections (socket 8) for equipment for use with
I
2
C Bus.
The number of pieces of equipment which can be
used is limited by the maximum permitted power
of the I
2
C Bus of 1 A.
It is worth noting here that I
usually positioned underneath each other. Con-
trol equipment can therefore only be positioned
to the right of the TWIN-CENTER, whilst keybo-
ards can only be positioned on the left of the
TWIN-CENTER. Foreign central controllers with
I
2
C Bus can be positioned either left or right of the
TWIN-CENTER as desired. For further informati-
on please contact our customer service depart-
ment.
For the connection, an adapter of the German
firm "Uhlenbrock" is required.
01.03.2007
13:57 Uhr
4 The connections of the TWIN-CENTER
2
C Bus
C Bus equipment is
2
Seite 101
101
Werbung
Kapitel
Inhaltsverzeichnis
