Installation; Installing The Appliance; Connecting The Appliance To The Power Supply - Electrolux ems26418 Benutzerhandbuch

electrolux installation
164

INSTALLATION

The microwave can be fitted in
position A or B:
Position
A
B
Measurements in (mm)
Position A
Conventi o nal
oven

Installing the appliance

1. Remove all packaging and check carefully
for any signs of damage.
2. Fit the appliance into the kitchen cup-
board slowly, and without force, until the
front frame of the oven seals
against the front opening of the cupboard.
3. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
Niche Size
W D H
560x550x380
560x500x380
Position B
D
4 mm
Fixing Option 1:
Fix the oven in position with the screws
provided. The fixing points are located on
the top and bottom corners of the oven.
Fixing Option 2:
Please see the template sheet supplied
with this oven.
Important:
Ensure the bottom of the oven is 85 cm
or more above the floor.
It is important to ensure that the
installation of this product conforms
to the instructions in this operation
manual and the conventional oven
manufacturer's installation
instructions.
Connecting the appliance to the
power supply
• The electrical outlet should be
readily accessible so that the unit
can be unplugged easily in an
emergency. Or it should be possible
to isolate the oven from the supply by
incorporating a switch in the fixed
wiring in accordance with the wiring
rules.
• The socket should not be
positioned behind the cupboard.