Power One AURORA PVI-10.0-I-OUTD-400 Installations- Und Bedienungshandbuch Seite 23

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
NO Derating
-5°
Derating
AURORA must be mounted vertically. Follow the information contained in the
following paragraphs in order to mount the device correctly.
NOTE. It is advised to install AURORA away from direct sunlight and
heat sources, including heat generated by other AURORA inverters (see
Fig. 5)
When ambient temperature exceeds 50°C for PVI-10.0-I models, or 45°C for PVI-
12.0-I models, the inverter will self-derate the output power.
In order to avoid overheating, always ensure that the airflow around AURORA is
not blocked.
0°
5°
Derating
Fig. 6 - Titled mounting
Page
Derating
22 97
of