Led Status - Power One AURORA PVI-10.0-I-OUTD-400 Installations- Und Bedienungshandbuch

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
The following table shows all the possible combinations of LED activation,
with reference to the operational state of AURORA.
Key:
LED on
LED flashing
LED off
Any of the above conditions

LED STATUS

green:
yellow:
1
red:
green:
yellow:
2
red:
green:
yellow:
3
red:
green:
yellow:
4
red:
green:
yellow:
red:
5
OPERATIONAL
STATUS
AURORA self-
disconnection
AURORA initialization,
loading the settings, and
waiting for grid check
AURORA is powering
the grid
Anomaly detected in the
isolation system
Anomaly – fault!!!
49
Page
NOTES
Input voltage less than 70%
of the set start-up voltage for
both inputs
It is in a transition status due
to operating conditions
being checked
The machine is operating
normally (search for the
maximum power point or
constant voltage)
Leakage to the ground
detected
The fault may be internal,
or it may be an external
anomaly,
refer to the alarm which
will appear on the LCD
display
97
of