Installation; Package Inspection - Power One AURORA PVI-10.0-I-OUTD-400 Installations- Und Bedienungshandbuch

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
3

INSTALLATION

WARNING: the electrical installation of AURORA must be performed
in compliance with the applicable local and national standards and laws.
WARNING: connecting AURORA to the electrical distribution grid may
only occur after having received authorization by the power supply
provider.
3.1

Package inspection

NOTE: The distributor delivered your AURORA to the carrier safely
packaged, and in perfect condition. By accepting the package, the carrier
assumes responsibility for its delivery. Despite careful handling by the
carrier, both the packaging and its contents may have been damaged
during transport.
The client is invited to perform the following checks:
To examine the shipping container in order to check for visible damage,
holes, cracking, or any other sign of possible damage to its contents;
To describe any damage or missing parts on the delivery documents, and to
obtain the carrier's full name and signature;
To open the shipping container and examine its contents to check for any
internal damage. When unpacking, make sure not to discard any equipment,
components, or manuals. In the event that some form of damage is detected,
contact the delivery carrier to determine the appropriate course of action. As
the carrier may request an inspection, it is important to keep all shipping
material for the inspector!
Should the inspection detect damage to the product, please contact your local
supplier or authorized distributor. They will determine whether the equipment
must be returned for repair, and will provide the relevant instructions for
doing so;
It is the client's responsibility to file a complaint with the carrier. Failure to do
so may result in the loss of all warranty service rights for any reported
damage; Keep AURORA original shipping package in case the device has to
be returned for repair.
Carefully keep the original package, as should the inverter be sent back for
repairs, the original package must be used.
19 97
Page of